Meteor75 Pro Drone | Matrix Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix
Meteor75 Pro Drone | Matrix

BetaFPV

Meteor75 Pro Drone | Matrix

$139.99 USD
20 in stock, ready to ship
Notes

**Product Disclaimer**

 
If you encounter any issues with your product, please retain your purchase receipt and contact BETAFPV support for assistance. As weBLEEDfpv is solely a distributor, BETAFPV will handle all warranty claims and replacements. (support@betafpv.com)  Please note, by soldering or by flying and crashing the drone, you accept full responsibility for any resulting damages or malfunctions. ***


Retaining its impressive 45mm propellers, powerful 1102 22000KV motors, and a BT2.0 550mAh 1S battery, the Meteor75 Pro continues to lead as the largest 1S whoop with exceptional thrust and agility. The upgraded Matrix 1S Flight Controller enhances performance with a G473 processor for a 55% speed boost and an integrated 5.8GHz 400mW VTX. Its durable 1mm-thick board and built-in motor plugs make installation easier and improve robustness. Paired with the same ESC, motor, C03 FPV camera, and Micro Canopy as the Meteor75, this combo enhances versatility, making it ideal for both indoor and outdoor FPV racing and freestyle.

Bullet Points

  • The upgraded Matrix 1S Brushless Flight Controller brings exceptional durability and performance to the Meteor75 Pro. It features a G473 processor, boosting computing speed by 55%, along with an integrated 5.8GHz 400mW VTX for seamless integration. Its robust 1mm-thick board adds durability, and the built-in motor plugs simplify installation, making it ideal for beginners while ensuring excellent performance for FPV racing and freestyle.
  • The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
  • It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
  • Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
  • Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
  • The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.

    Specifications

    Meteor75 Pro VS Air75

    The new Meteor75 Pro, equipped with the upgraded Matrix 1S Brushless Flight Controller, delivers enhanced performance with a G473 processor for 55% faster computing over the old version, a durable 1mm-thick board, integrated 5.8GHz 400mW VTX, and motor plugs for easier installation. Built for durability and beginner-friendliness, it requires no welding, making it an ideal choice for those prioritizing resilience and simplicity. In contrast, the Air75 Brushless Whoop Quadcopter is lighter, with a 75mm wheelbase, catering to advanced pilots seeking agility and performance to push the limits of their FPV experience.

     

    Meteor75 Pro

    Air75

    Matrix ELRS 2.4G (2024)

    ELRS 2.4G (2023)

    ELRS 2.4G

    Frame

    Blue Meteor75 Pro Frame, white Micro canopy

    Blue Air75 frame, transparent Air canopy

    Wheelbase

    80.8mm

    75mm

    Weight

    30.5g

    31.0g

    21g

    FC

    Matrix 1S

    F4 1S 5A AIO

    Air 4IN1

    MCU

    STM32G473CEU6

    STM32F411CEU6

    STM32G473CEU6

    OSD

    BetaFlight OSD: AT7456E

    ESC

    1S, 5A

    MCU Frequency

    168MHz

    108MHz

    168MHz

    Gyro

    ICM42688P

    BMI270

    ICM42688P

    Gyro max. sampling rate

    8KHz

    3.2KHz

    8KHz

    Blackbox Memory

    16M

    8M

    16M

    RX

    Onboard Serial ELRS 2.4GHz

    Onboard Serial ELRS 2.4GHz/SPI Frsky

    Onboard Serial ELRS 2.4GHz

    VTX

    Onboard 5.8GHz 48 Channels, 400mW

    M03

    5.8GHz 48 Channels, 400mW

    Camera

    C03

    Motor

    1102|22000KV

    0802SE|23000kv

    Props

    GF 45mm-3B

    GF 40mm-2B

    Recommeded battery

    BT2.0 1S 550mAh 40C

    LAVA 1S 450mAh 75C

    Flight time

    6:30

     

    Powerful 1S Drone Combo

    Meteor75 Pro with 45mm 3-Blade props performs very precise, agile, and fantastic flying, which is the largest 1S power whoop drone nowadays. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, Meteor75 Pro has an excellent thrust-to-weight ratio performance.

    Flight Controller

    The Meteor75 Pro, now featuring the Matrix 1S Brushless Flight Controller, combines enhanced durability, processing power, and adaptability for a superior 1S whoop experience. Its 1mm-thick circuit board increases resilience during intense flying, while the G473 processor enhances response speed and control precision. Simplified setup is achieved through integrated motor plugs, and its 5.8GHz 400mW VTX delivers stable, high-quality video transmission. Perfect for both indoor and outdoor FPV racing or freestyle, this high-performance drone is built for versatility and reliability.

    The following information on the F4 1S 5A Flight Controller has been retained for your reference:

      The latest F4 1S 5A flight controller is applied to all BNF versions of Meteor75 Pro. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.


        		 Meteor75 Pro (ELRS)
        		 Meteor75 Pro (Frsky, PNP, TBS)
        FC Inside F4 1S 5A FC (Serial ELRS 2.4G) V2.0 F4 1S 5A FC (SPI Frsky) V3.0
        Gyro BMI270 BMI270
        FC Firmware BETAFPVF411 BETAFPVF411RX
        UART Port One UART Port Two UART Ports
        External RX Not Supported Supported

        Note: For Serial ELRS 2.4G, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For SPI Frsky, DO NOT flash the other firmware, otherwise, the RX will be lost in control at a very close range. Please flash betaflight_4.2.11_BETAFPVF411RX firmware built by BETAFPV for SPI Frsky.

        C03 FPV Camera

        C03 is a lightweight 1.45g and 1200TVL resolution camera that has been designed to provide superb performance for micro FPV quadcopters. It has a 2.1mm lens that gives a 160° field of view, operating in 4:3 image ratios, and features a 1/3'' CMOS sensor for clear and brilliant images.

        Endurance Boosting Battery

        Meteor75 Pro applies the new BT2.0 550mAh 1S battery, which is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). With its larger capacity and stronger power, pilots can enjoy more flight time and a robust flight experience.

        Meteor75 Pro Frame

        Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.

        Meteor Series

        BETAFPV aims to provide the best whoop quadcopters for pilots and Meteor Series whoop quadcopters are definitely the perfect balance in all areas of performance. From 1S to 2S, indoors to outdoors, whether agility, maneuverability, speed, or stability, Meteor series whoop drones meet the needs of a variety of flight environments and offer excellent experiences to pilots. The latest Meteor75 Pro with 45mm props, being the largest 1S whoop, is proud of its performance both indoors and outdoors.

        Recommended Parts


        FAQ

        Attention

        Please note that warranty claims are limited to DOA (Dead on Arrival) units and manufacturer defects only. The product must be free from physical damage, scratches, missing components, or modifications. Crashes, improper handling, modifications, power surges, electrical fires, or water exposure will void the warranty. Physical crash damage is not covered under any circumstances. For further assistance, please contact our technical support team.

        Package

        • 1 * Meteor75 Pro Brushless Whoop Quadcopter
        • 2 * BT2.0 550mAh 1S Battery
        • 1 * Type-C USB Cable
        • 1 * BT2.0 Battery Charger and Voltage Tester
        • 1 * USB Type-C Adapter
        • 1 * 4Pin Adapter Cable
        • 4 * 45mm 3-Blade Props (1.5mm Shaft)
        • 1 * Screwdriver
        • 1 * Pack of Screws
        • 1 * Accessories for Canopy
        Product information

        All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

         

        Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

         

        Flight Controller / VTX Warranty Policy
         
        At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
         
        1. No Warranty Post-Soldering: 
           Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
           
        2. Pre-Soldering Inspection: 
           Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
         
        3. User Responsibility: 
           Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
         
        4. Final Sale: 
           All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

        **************************************************************************

        Lithium Ion Battery No Acceptance Policy

        For our lithium ion battery products, all sales are final. This means:

        • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
        • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
        • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

        Thank you for your understanding.

        Drop Us A Line

        We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.