weBLEEDfpv

FPV Power Splitter (1-to-3)

$5.99 USD
491 in stock, ready to ship
Notes

Pickup available at SaltCtyRacingFPV LLC

Usually ready in 24 hours

FPV Power Splitter (1-to-3)

You asked… we delivered 🩸

Tired of juggling plugs and powering one setup at a time?

Our FPV Power Splitter (1-to-3) lets you run multiple devices off a single power source — clean, simple, and exactly how your pit setup should be.

 

Check Out what HornyCoRn says about the ViFLY whoop Charger ... 

https://photos.app.goo.gl/CwknHxFGFpmfkJNW8

 

⚡ What it does

  • 🔌 Split one DC power source into 3 outputs
  • 🏁 Perfect for whoop charging setups
  • 💡 Ideal for LED gates / bench builds
  • 🧱 Solid molded connectors — no flimsy junk

🔧 Specs

  • Connector: 5.5 × 2.1mm DC barrel
  • Config: 1 Female → 3 Male
  • Use Case: 12V–16V DC systems

👉 Pair this with a proper USB-C PD adapter and cable for best performance.

⚠️ Heads Up – Power Supply Matters

When running multiple devices, your power source needs to handle the total load.

👉 If you’re using a USB-C setup, make sure you’re using:

  • A USB-C Power Delivery (PD) wall adapter (20W–45W+)
  • A USB-C to USB-C cable rated for 60W–100W

Not all USB-C chargers are created equal — lower power adapters or cheap cables may not provide enough output and can cause chargers to not power on properly.

⚠️ When using this 1-to-3 splitter, you’re running multiple devices from a single power source.

👉 Make sure your power supply can handle the total combined load of everything connected.

For best performance, we recommend:

  • A reliable 12V power adapter
  • Or a USB-C to barrel cable paired with a high-output USB-C power brick

⚡ Example:
If each device draws 1A, running 3 devices = 3A total required

Running an underpowered supply can result in:

  • Dim LEDs
  • Flickering
  • Devices not powering on

🧠 Pro Tip

When in doubt… go bigger on the power supply, not smaller.

Clean power = clean performance 🩸

 

https://photos.app.goo.gl/CwknHxFGFpmfkJNW8
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.