FPVCycle

FPVCycle 22.6mm Motor

$12.99 USD
Choose Stator and Bell Color
1 in stock
Notes

Bell and stator sold separately.

Buy the colors you want and simply snap the bell onto the stator.

 

The colors on these motors are gloriously pretty. We worked VERY hard on them.

This motor is designed for high power and high response 5" performance without sacrificing efficiency. The unique 22.6mm stator size comes from the RCInpower Wasp motor which is uniquely powerful and efficient for its size and weight. We've taken that same formula, updated the magnets, thickened the magnets, and increased the stator height for more overall torque without overdoing the surface area to volume ratio of the stator. The Kv is 1920 and has been carefully tuned to provide the response and power which results in that intoxicating connected feel with the craft.

Other features include a bell that is very easy to remove and swap out and a rubber O-ring between the bell and bearing for shaft retention pressure control.

The bell spoke design of all our latest 5" and up motors are extra thick for even more durability. Even so, nothing can ultimately hold up to the smashing punishment that is FPV. We're selling the stator and bell separately to make a statement that you can repair your motors very easily with only one screw. As a bonus, we're able to offer various bell colors without stocking an excessive number of products.

Recommendations:

  • Gemfan 51433 (HIGHLY recommended all around)
  • Gemfan F4S (GREAT response and power)
  • Gemfan F3S (more response, lower power)
  • 1000 - 1250mah 6S
  • 1100 - 1300mah 5S
  • 1300mah 4S - very high efficiency, less power
  • (Highest C rated batteries are generally recommended for the best performance)

Specifications:

  • Bell - 14.4g (silver is 14.3g)
  • Stator - ~19.6g with ~90mm wire
  • Total motor weight with short wire is about 33g
  • Delta wound wires
  • 7075 Aluminum alloy
  • 12N14P Configuration
  • M5 Prop Adapter Shaft Thread
  • 14mm Titanium alloy hollow shaft (8mm thread)
  • Flanged prop nut (M5x6), no washer
  • Japanese NMB 9x4x4mm Bearing
  • N52H arc magnets with retention lip on bell
  • 0.15mm Nippon Steel silicon steel laminations
  • 20AWG wire, ~20cm length
  • 2.5mm thick mounting base, flush mount
  • 16X16mm M3 mount OR 12x12mm M2 mount
  • M3x5 button head bell retention screw

 

DO NOT DRIVE YOUR MOUNTING SCREWS INTO THE WINDINGS WHEN MOUNTING THE MOTOR. IT WILL BREAK THE MOTOR.

 
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.