FPVCycle

FPVCycle PowerPick Frame (Choose 4” or 5”)

$22.99 USD $14.99 USD Save 35%
Size
40 in stock, ready to ship
Notes

NOTE:
The canopy that comes with this frame is kinda ugly and designed to be replaced. There are no readily available canopies that meet our preferences so we threw this canopy design on top to make sure at least the camera has some reasonably good protection. If something good comes around, we will offer that and likely drop the carbon canopy off these kits.  For now you’ll need to provide your own battery strap.

The PowerPick is a Toothpick-like design that’s not really a Toothpick. It has a more robust structure and the resulting craft will be way more powerful. That’s why it’s called Power Pick. Once you get up to 4” and 5”, you start entering the realm of blistering speeds and enough inertia to demolish the craft. Even we don’t feel comfortable flying something that would be super fragile under these conditions. The PowerPick is not a tank by any standard but it’s also not a super light. It’s designed to use it’s weight efficiently to withstand minor to moderate impacts, and at least offer some component protection in the form of motor bumpers. When paired with the FPVCycle 2203 motors and 3S 1100mah batteries, this thing will be one of the most nimble FPV vehicles in existence.


Some thoughts on the 250g AUW number:
There are some countries that strictly enforce the 250g AUW policy (sorry if you live in one of those) but most don’t have people walking around with scales making sure your toy is under 250g. This 250g number was taken from something a scientist may have said about a projectile during the world war II era (we think, we’re not even sure). Today this 250g number is completely arbitrary and means absolutely nothing. Just because you’re flying something that’s 249g does NOT mean you cannot cause trouble and does NOT mean you won’t get in trouble for doing something dumb. On the same note, if you’re flying something that’s 251g, it doesn’t mean you’re going to go to jail. Be safe, use good judgement and don’t piss off or annoy ANYONE! The proposed setup with our recommended motors, batteries and electronics on this frame will put it a bit over the 250g mark.  This has been designed to be light yet durable enough and above all, perform well.  We just do not understand the rationale behind sacrificing performance for the sake of this totally arbitrary 250g number that means absolutely nothing.  If you’re one of those hankering for that number, you can just run smaller/lighter motors and hit that number if you wish.

Specifications:

  • Included canopy is Nano sized camera only (15mm width)
    5" version weight ~29g without carbon canopy, ~43g with carbon canopy
  • 4" version weight ~24g without carbon canopy, ~39g with carbon canopy
  • 3mm arms, 1.5mm body plates
  • Motor mount: 12x12 M2
  • Diagonal size in 4”: 154mm
  • Diagonal size in 5”: 186mm
  • FC mounting: 20x20, 25.4x25.4 through 26.6x26.6 Toothpick/whoop mount slot
  • Nice sized motor protection bumpers
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.