FPVCycle

Silicone Wire (16 AWG, 18 AWG, 26 AWG)

$1.99 USD
Size
22 in stock, ready to ship
Notes
~1M red + ~1M black of selected size per bag


About one meter length of red and about one meter length of black in each pack. These wires are specifically chosen to stock because they are the most useful sizes. These are multi stranded with a silicone sheath

The 16awg is what we’ve used for 4S-6S 5” quads for years. We don’t like long leads so 14awg isn’t needed and with all these new ESC’s, the pads aren’t even big enough to properly support 14awg.

The 18awg is intended for Toothpicks or otherwise lower power applications. The BabyTooth can use this as well but keep the lead short to reduce weight. 20awg is a bit smaller than we’d like for this application which is why we carry 18awg.

The 26awg is intended for general use between FC’s and ESC’s or Rx’s or really any low load area. The super tiny wires that sometimes come with components are a bit smaller than we’d like. This wire is nice and thick for the application. Confidence inspiring But a warning with this wire. It’s not that thin so it would be difficult to solder some of the smallest solder pads.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.