FPVCycle

FPVCycle 25mm Motor - The Extra Smooth One

$14.99 USD
Options
196 in stock, ready to ship
Notes

Bell and stator now sold separately.

Buy the colors you want and simply snap the bell onto the stator.

 

This is the first and only FPV motor on the market with Split Shifted magnets.

Simulations told us that this design would be 99% the same as a skewed stator design which is supposed to even out the flux field around the bell and increase the average torque. We've been around the block a few times so we weren't surprised when that's not how it played out in the real world. The real world result is that the throttle just feels like it has a whole lot more resolution on it leading to a more enhanced control feel when you're trying to smoothly work the throttle. (spoiler, the Split Shifted magnet design doesn't work out as an improvement on any motor size...we're only using it on this motor after much testing and tweaking)


The performance target of this motor is improved low throttle power with enhanced throttle feel. If you're looking for the smoothest flight performance, this is the motor for you. It's still powerful enough to knock your socks off and especially good at maintaining higher cruising speeds on a 5.2" prop like the Gemfan 5226 (don't bother with the 5236, it's not as good as the 5226).

This is the 4th gen of this motor and it's been an expensive development journey. With the latest development of the Split Shift magnet structure, we believe it's as good as it can be. This motor also shares the more recent developments of easy bell swaps, extra thick bell spoke structure and the O-ring shaft tension system.

 


Recommendations:

  • High performance: 1870kv with 6S 1100-1400mah and AUW below ~745g
  • Med-High performance: 1870kv with 5S 1550mah and AUW below ~745g
  • High performance: 2150kv with 5S 1200-1600mah and AUW below ~745g
  • Cruising: 1870kv or 2150kv with as little as 4S 1300mah or larger battery
  • Any of the above setups at a lower AUW is going to perform significantly better.

This Motor Pairs Well With:


    Specifications:

    • ~35g with ~20mm wires
    • Delta wound winding
    • 7075 Aluminum alloy
    • 12N14P Configuration
    • M5 Prop Adapter Shaft Thread
    • 13.5mm Titanium Alloy hollow shaft (8mm thread)
    • Flanged prop nut (M5x6), no washer
    • Japanese NMB 9x4x4mm Bearing
    • N52H arc magnets with retention lip on bell
    • 0.15mm Nippon Steel silicon steel laminations
    • 20AWG wire, ~20cm length
    • 2.5mm thick mounting base, flush mount
    • 16X16mm M3 mount
    • M3x8 button head bell retention screw
    • DON'T DRIVE YOUR MOUNTING SCREWS INTO THE WINDINGS WHEN MOUNTING THE MOTOR. IT WILL BREAK THE MOTOR.
    Product information

    All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

    **************************************************************************

    Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

    **************************************************************************

    Flight Controller / VTX Warranty Policy
     
    At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
     
    1. No Warranty Post-Soldering: 
       Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
       
    2. Pre-Soldering Inspection: 
       Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
     
    3. User Responsibility: 
       Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
     
    4. Final Sale: 
       All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
    **************************************************************************

    ⚠️ FPV DIGITAL SYSTEM NOTICE

    HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

    Bench setup without airflow/cooling can result in excessive heat buildup.

    Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

    Manufacturer warranty may apply for BNF drones and electronic systems.

    **************************************************************************

    Lithium Ion Battery No Acceptance Policy

    For our lithium ion battery products, all sales are final. This means:

    • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
    • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
    • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

    **************************************************************************

    Thank you for your understanding.

    Drop Us A Line

    We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.