Happymodel

Happymodel Mobula6 2024 V3 65mm 1S Analog BNF Whoop – ELRS

$167.99 USD Sold out

(2)

Notes

Small tracks. Tight lines. More stick time.

The Happymodel Mobula6 2024 V3 is a lightweight 65mm analog whoop for indoor practice, micro racing, and freestyle sessions. Its compact size makes everyday spaces a place to work on smoother corners, cleaner gates, and consistent laps.

The V3 pairs a CrazybeeG473 flight controller with a Nano5 1200TVL camera, bringing updated electronics to the Mobula6 platform.

V3 Features

  • CrazybeeG473 AIO with an STM32G473 processor.

  • Nano5 1200TVL analog camera with a 4:3 image.

  • Serial ExpressLRS 2.4GHz receiver.

  • 5.8GHz OpenVTX, adjustable up to 400mW.

  • 0702 28,000KV motors with direct-solder connections.

  • 31mm tri-blade propellers.

  • A30 battery connector, listed by Happymodel as BT2.0-compatible.

Specifications

Specification Details
Model Mobula6 2024 V3
Configuration Bind-and-fly
Wheelbase 65mm
Dimensions 81 × 81 × 37mm
Manufacturer-Listed Weight 17.6g
Battery Input 1S LiPo / LiHV
Motor Shaft 1mm
ESC Rating 5A continuous per motor
Camera Sensor 1/3-inch CMOS
Camera Field of View 155°
Camera Signal NTSC
Flight Controller Mounting 25.5 × 25.5mm

 

Motor Connections

The V3 uses direct-soldered motor wires.

Motor replacement requires soldering.

 

What You Need to Fly

This is a BNF aircraft. Binding and setup are required. Supply your own:

  • Compatible ExpressLRS 2.4GHz transmitter.

  • Compatible 5.8GHz analog FPV goggles or monitor.

  • Suitable 1S batteries that fit the tray and connector.

  • Compatible 1S battery charger.

What’s Included

  • 1 × Assembled Mobula6 2024 V3 BNF aircraft.

  • Gemfan 1208-3 propellers: 4 CW + 4 CCW total.

  • HQProp 1.2 × 1.1 × 3 propellers: 2 CW + 2 CCW.

  • 1 × Spare canopy.

  • 1 × Propeller removal tool.

  • 1 × Screwdriver.

Setup and Firmware

Back up the factory configuration before making changes. Confirm your flight controller’s hardware revision and use the matching V3 firmware files.

Visit the official Happymodel V3 support page for wiring diagrams, factory configuration files, and revision-specific firmware guidance.

Manufacturer Support

For troubleshooting or manufacturer warranty assistance, contact info@happymodel.cn. Include your order information, a description of the issue, and clear photos or video.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.