Happymodel Mobula6 FREESTYLE HD BNF

Description

The Happymodel Mobula6 Freestyle HD BNF is the first 65mm HD brushless tiny whoop that weighs less than 19.6g. With tiny whoops, every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video! 

Focusing on freestyle flying, this whoop includes the Runcam HDZero Lux camera and a vibration-free fixed angle 25deg camera mount. The camera features a ½ inch CMOS sensor that delivers sharp image quality and excellent low-light performance. Lux camera has Wide Dynamic Range (WDR) and offers higher quality by oversampling (1080p ‐> 720p). The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability.

Optimized for a 4:3 aspect ratio, it can also be configured for a 16:9 aspect ratio with a reduced vertical FOV. The camera boasts a large 94-degree vertical FOV, ideal for fast indoor and outdoor proximity flying. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for.

 Specifications

• Weight: 19.9g

• Recommended Battery: 1S 300mAh

• Propellor Size: 31mm

• AIO

• MCU: STM32F411 (100MHz, 512K Flash)

• Gyro: BMI270

• On board voltage and amperage meters

• Built-in 5A(each) BLHeli_S 4-in-1 ESC 

• Built-in 5.8G HDZero VTX 

• Built-in SPI ExpressLRS 2.4GHz receiver

• Built-in 5V 1A BEC 

• Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size

• HDZero Lux Camera

• Sensor size: 1/3 inch

• Resolution: 720p60 4:3 and 16:9

• FOV: D:155° H:126° V:94°(4:3)

• FOV: D:145° H:126° V:82°(16:9)

• Motors

• Kv:28000

• Stator diameter: 7mm

• Stator length:2mm

• Shaft diameter: Φ1mm

• Weight:1.5g

Included

• 1x Happymodel Mobula6 Freestyle HD BNF

• 1x Spare canopy

• 1x Spare propeller(set)

• 1x Screw driver

1x propeller disassemble tool

Warranty Policy:

If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn