Happymodel

Happymodel Mobula6 Race HD 65mm 1S Whoop – HDZero / ELRS 2.4GHz

$274.99 USD Sold out

(1)

Notes

Tight gates. Small spaces. HDZero video.

The Happymodel Mobula6 Race HD packs digital FPV into a lightweight 65mm brushless whoop. With a manufacturer-listed weight of 19.3g without a battery, it’s built for indoor laps, technical tracks, and everyday practice.

The HDZero AIO5 combines the flight controller, 4-in-1 ESC, HDZero video transmitter, SPI ExpressLRS receiver, and 5V regulator on a single board. Less hardware keeps the build compact, while 0702 28,000KV motors and 31mm props handle the flying.

An HDZero Eco camera supplies 720p60 video in a 4:3 format. Its single-wire video connection reduces wiring bulk and eliminates the need for a MIPI camera cable.

Key Features

  • 65mm ducted frame for compact whoop flying.

  • 19.3g listed weight without battery.

  • HDZero Eco camera with 720p60, 4:3 video.

  • HDZero AIO5 electronics on one board.

  • Built-in SPI ExpressLRS 2.4GHz receiver.

  • 0702 28,000KV brushless motors with 1mm shafts.

  • 31mm propellers powered by a 1S battery.

  • Lightweight RENY screws and VTX antenna.

Specifications

Specification Details
Model Mobula6 Race HD
Manufacturer Happymodel
Manufacturer Part Number 5A10094
Configuration Bind-and-fly
Frame Class 65mm
Listed Weight 19.3g without battery
Recommended Battery 1S 300mAh
Propeller Size 31mm
Estimated Flight Time Approximately 2.5–3 minutes
Motors 0702, 28,000KV
Motor Shaft Diameter 1mm
Motor Weight 1.5g each
Camera HDZero Eco
Video Resolution 720p60
Aspect Ratio 4:3
Camera Sensor 1/3 inch
Camera Field of View 150° diagonal / 120° horizontal / 98° vertical
Receiver SPI ExpressLRS 2.4GHz

Flight time varies with battery condition, flying style, and setup.

HDZero AIO5 Specifications

  • STM32F411 processor, 100MHz with 512K flash.

  • BMI270 gyro.

  • Built-in 4-in-1 BLHeli_S ESC, rated at 5A per motor.

  • Integrated 5.8GHz HDZero video transmitter.

  • Integrated SPI ExpressLRS 2.4GHz receiver.

  • 5V / 1A BEC.

  • Onboard voltage and current sensing.

  • Board dimensions: 28.5 × 28.5mm.

  • Mounting pattern: 25.5 × 25.5mm.

  • Betaflight firmware target: CRAZYBEEF4SX1280.

What You Need to Fly

This is a BNF aircraft, so binding and setup are required. Supply your own:

  • Compatible ExpressLRS 2.4GHz radio transmitter.

  • HDZero-compatible goggles or receiver/display setup.

  • Suitable 1S 300mAh batteries with a matching connector.

  • Compatible 1S battery charger.

What’s Included

  • 1 × Happymodel Mobula6 Race HD BNF.

  • 1 × Spare canopy.

  • 1 × Spare propeller set.

  • 1 × Screwdriver.

  • 1 × Propeller removal tool.

Setup Resources

Save a backup of your factory configuration before changing settings or firmware. Use the files intended specifically for the Mobula6 Race HD.

Visit the official Happymodel product and support page for binding instructions, default receiver settings, and the factory Betaflight 4.4.2 dump.

Manufacturer Support

For Happymodel troubleshooting or warranty assistance, contact info@happymodel.cn. Include your order information, a description of the issue, and supporting photos or video.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.