Hot
New
Pre-order
Out of Stock

HDZero Freestyle V2 VTX

SKU: HDZ3131

AVAILABILITY: In stock (20 items)

$99.99

PRODUCT INFORMATION
PRODUCT INFORMATION

The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws.

The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes.

The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities.

 

Specifications

Manufacturer

    Divimath, Inc

Model

    HDZero Freestyle V2 VTX

Weight

    22.3 g

Dimensions

    29x30x14mm

Operating Frequency

    5.725-5.850GHz

Transmitter Power

    25mW,200mW

Mounting Pattern

    20x20mm M2 holes

Antenna Interface

    Secured U.FL

Video In

    Secured MIPI

SmartAudio

    Yes

MSP Canvas Mode

    Yes

Input Power

    7-25V

Operating Temperature

    32˚F-104 ˚F (0˚-40˚C)

Power Consumption

    6-15W

 

Includes

  • 1x Freestyle V2 VTX
  • 1x Power Cable
  • 1x SA Cable
  • 1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).
  • 1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)
  • 1x Double Sided Tape (29 x 30 x 1mm)
Flight Controller Warranty Policy

At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and the precision required for installation, our warranty policy for flight controllers is as follows:

1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.

3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.

4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.