FPVCycle

FPVCycle 16mm Motor - 4100Kv

$17.99 USD
Type
78 in stock, ready to ship
Notes

This motor is unique in a few ways. First off, it’s sporting our new lighter prop shaft design, it’s got a 9x9 M2 mount so it will fit lighter style frames and the overall stator volume is higher than 1605 while weighing much less than it should. This motor is ideal for high powered 3” operation and low weight 4” crafts.

The goal of this motor is maximum power and control for a medium weight 3" quad. A taller stator with taller magnets are used for the high RPM control needed for small 3" props but a wide 16mm diameter with middling 4100kv is used to manage the heat dissipation of the motor in use. This is one of the most genuinely unique and interesting motors we've got in our lineup.

This motor is very powerful and 'notchy'. Please be sure to use a properly applied and appropriately sized capacitor.

Recommended Uses:

  • 3” 3S-4S high powered craft with AUW >150g
  • 4” 3S with very low load props and under ~250g AUW

Specifications:

  • 16mm stator diameter, greater than 5mm stator height
  • 9x9mm M2 mounting pattern (not flush mount)
  • ~13g with ~70mm length wires
  • ~16g with prop adapter, nut and 240mm 24awg wire length
  • 0.15mm Kawasaki High performance laminations
  • N52SH ARC magnets
  • 3mm grade 5 titanium internal shaft
  • M3 grade 5 titanium prop shaft with M5 adapter
  • 2x5x2.5mm 520zz Japan ISC Custom bearings
  • 7075-T6 aluminum casing
  • 260℃ enamel coated single wrap oxygen-free copper windings
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.