Bag (0) 0
US($)
English
  • English
  • Home
  • In Stock Products
SHOW FILTER (251)
Featured Best selling Alphabetically, A-Z Alphabetically, Z-A Price, low to high Price, high to low Date, old to new Date, new to old

Showing 251 products

Clear All
BETAFPV - BT2.0-PH2.0 Adapter Cable (6 pcs)
Pre-order
Out of Stock

BETAFPV - BT2.0-PH2.0 Adapter Cable (6 pcs)

SPECIFICATIONSItem: BT2.0-PH2.0 Adapter Cable Length: 55mm (Not included the plug)Weight: 1.07g(1 pcs)Wire Type: 22AWGInput Port: PH2.0 male connector（connect PH2.0 charger）Output Port: BT2.0 female connector (connect BT2.0 batteryNote: Blue represents the positive pole (+); White represents the negative pole(-)

$7.99
BETAFPV - BT2.0 Connectors (5 Sets)
Pre-order
Out of Stock

BETAFPV - BT2.0 Connectors (5 Sets)

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to banana connector and increasing the cross-sectional area of banana connector.With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports...

$7.99
BeeBrain Lite FrSky - Project Mockingbird Edition Brushed Whoop
Pre-order
Out of Stock

BeeBrain Lite FrSky - Project Mockingbird Edition Brushed Whoop

From the brainchild of Patrick Clarke, we are proud to announce the Project Mockingbird Edition BeeBrain Lite!WHAT'S SO SPECIAL ABOUT PROJECT MOCKINGBIRD?THE BEST Angle Mode you can find for a BRUSHED Betaflight Whoop. The ability to switch rates from Angle...

$99.99
BeeBrain hardware - Grommets & Screws
Pre-order
Out of Stock

BeeBrain hardware - Grommets & Screws

Spare set of hardware for your BeeBrain or regular Inductrix flight control board.

$3.99
AcroBee Prop Removal Tool
Pre-order
Out of Stock

AcroBee Prop Removal Tool

The AcroBee Prop Removal tool was designed by Chris AKA DZ. This propeller removal tool was designed to remove most of the whoop-sized propeller easily without damaging the motors or the propellers. Additionally, it can be used to unplug the...

$2.99
DIY - AC/DC POWER ADAPTER 12v 6A
Pre-order
Out of Stock

DIY - AC/DC POWER ADAPTER 12v 6A

AC/DC POWER ADAPTER  INPUT: AC100-240V~50/60Hz OUTPUT: DC12V ~~~ 6A Connecting Plug 12mm round, works perfectly with our, https://webleedfpv.com/collections/diy-fpv-whoop-gates-accessories/products/webleedfpv-sp106e-led-sound-controller  

$11.59
E6000 Clear Contact Adhesive With Precision Applicator Tip 15ml
Pre-order
Out of Stock

E6000 Clear Contact Adhesive With Precision Applicator Tip 15ml

E6000 Clear Contact Adhesive With Precision Applicator Tip 15ml  E-6000 Contact adhesive can be used on many materials, for wood and metal products, handicrafts, ornaments, sticky drills, its solid content, curing time and viscosity make it a great strong adhesive....

$1.99
DIY - LED Electrical Cable 3 Pin 18 AWG OR 20 AWG
Pre-order
Out of Stock

DIY - LED Electrical Cable 3 Pin 18 AWG OR 20 AWG

RGB LED Electrical Cable 3 Pin 18 AWGRGB LED Electrical Cable 3 Pin 20 AWGConnecting Wire Used to Solder onto WS2812B, WS2811, SMD5050 Addressable LED Light Strips

$1.99
Select Option Select OptionSold Out Pre-Order
DIY - MAGIC RBG LED STRIP SMD5050 60LED (Soldering) Type
Pre-order
Out of Stock

DIY - MAGIC RBG LED STRIP SMD5050 60LED (Soldering) Type

PCB size：L1000*W10*H1.9 mmled source：SMD5050Input voltage：DC12VConnector: JST 3PINrated power：0.15w/ledLED color：RGBIC model NO.：1903 16703 2811 (single signal control) IP rating：IP20Leds: 60LEDS/M (20pcs IC) high brightnessPackage：(1) One 5m per roll = 16.40' 3leds/Cutting placeColor Strip : WHITE*SOLDERING TYPE*

$13.99
DIY - 3 Pin JST SM Male/Female Plug LED Connector Cable 20cm 20 AWG Wire
Pre-order
Out of Stock

DIY - 3 Pin JST SM Male/Female Plug LED Connector Cable 20cm 20 AWG Wire

3 Pin JST SM Male/Female Plug LED Connector Cable 20cm 20 AWG Wire (PAIR)Length 7.87" per side 15.74" Total

$1.49
DIY - LED 3PIN ONE to TWO-WAY CONNECTOR
Pre-order
Out of Stock

DIY - LED 3PIN ONE to TWO-WAY CONNECTOR

LED 3PIN ONE to TWO-WAY CONNECTOR

$1.23
DIY - MAGIC RBG LED STRIP SMD5050 60LED (PLUG) Type
Pre-order
Out of Stock

DIY - MAGIC RBG LED STRIP SMD5050 60LED (PLUG) Type

You can also use this version for direct soldering... use a scissor and cut across the copper soldering line ... just cut the plug off if you do not need to use it ...  PCB size：L1000*W10*H1.9 mmled source：SMD5050Input voltage：DC12VConnector: JST...

$12.99

SWEET & SPICY

Check out our new hot sauce!

PROTECT, PROTECT, PROTECT

Protect your joysticks with our thumb grippies!

Trending Now

ORT Micro Vee Linear 5.8GHz Antenna U.FL (5cm)
Pre-order
Out of Stock

ORT Micro Vee Linear 5.8GHz Antenna U.FL (5cm)

The lightest, smallest and most affordable antenna from ORT! Tired of getting mediocre performance from your default antenna AIO micro camera/VTX? Try their Micro Vee 5.8GHz! Fine-tuned Vee antenna for your micro or light quad build, covering from 5500~6000MHz will...

$6.99
Select Option Select OptionSold Out Pre-Order
weBLEEDfpv Modular CUBE GATE System
Pre-order
Out of Stock

weBLEEDfpv Modular CUBE GATE System

weBLEEDfpv Modular CUBE GATE System  weBLEEDfpv is proud to present our newest gate kit system, to our already extensive line of LED, CUBES, TUBE Systems, using nothing but the best material, using our signature Velcro, hanging loops, this modular system...

$32.99
Hummingbird V3.1 RaceSpec ELRS BNF
Pre-order
Out of Stock

Hummingbird V3.1 RaceSpec ELRS BNF

Weighing just 16.5g, the Hummingbird V3.1 RaceSpec BNF Mini Drone is crafted for professional FPV racers seeking peak performance in a lightweight design. Its agility and speed make it the ideal choice for competitive pilots looking to dominate the race track. Compliance is...

$89.99
TBS Lucid AIO 1-2S Flight Controller
Pre-order
Out of Stock

TBS Lucid AIO 1-2S Flight Controller

The last whoop flight controller that you will ever need. It's compatible with 1-2S and supports long range R/C protocols. The TBS Lucid AIO 1-2S was engineered to tick a lot of boxes for long range 1S/2S drone pilots as...

$63.99
weBLEEDfpv 0702 SPECIAL EDITION BRUSHLESS MOTORS SET OF (4 MOTORS)
Pre-order
Out of Stock

weBLEEDfpv 0702 SPECIAL EDITION BRUSHLESS MOTORS SET OF (4 MOTORS)

weBLEEDfpv0702 24,500kv SLASHERS EDITION0702 26,500kv BLEEDERS EDITION0702 28,500kv GORE EDITION  SHAFT SIZE: 1MM SET OF (4 MOTORS)

$42.99
Select Option Select OptionSold Out Pre-Order
weBLEEDfpv Micro Drone Race Gates
Pre-order
Out of Stock

weBLEEDfpv Micro Drone Race Gates

Hey FPV family! We are so excited to bring our passion and love too life and bring it to the FPV Community, weSTRIVE to bring you the best quality and designed Micro Drone Racing Gates within the marketplace! Premium materials...

$59.99
Select Option Select OptionSold Out Pre-Order

WHAT ARE YOU LOOKING FOR?

View all products

Search for "{{ result }}"

MY BAG (0)
Your shopping bag is empty.

Thanks for subscribing!

Continue Shopping

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingfpv "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.

Thanks for contacting us. We'll get back to you as soon as possible.

Continue shopping