TBS Avionics Co. Ltd.

TBS Lucid AIO 1-2S Flight Controller

$63.99 USD
30 in stock, ready to ship
Notes

The last whoop flight controller that you will ever need. It's compatible with 1-2S and supports long range R/C protocols.

The TBS Lucid AIO 1-2S was engineered to tick a lot of boxes for long range 1S/2S drone pilots as well as whoop pilots that don't enjoy radio link limitations and need a bit of extra power from their stack.

Built to a 25x25 "Whoop" form factor, it is the only board that has the necessary grunt to run 2S boards without burning out, while also being capable of running 1S batteries down so low you will hear them beg for mercy.

The "AIO" stands for all in one, or a 3-in-1 specifically. Included is an Flight controller, 4in1 ESC and Crossfire Receiver. It also comes with an OSD chip for analog video.

It hopefully goes without saying that each TBS Lucid AIO is tested out of the factory and has been put through the wringer by some of the most seasoned whoop pilots before being offered for sale, which further distinguishes the board from some of the incumbents. 

Specifications

MCU AT32F435RMT7, 288MHz
Gyro ICM-42688P
ESC 4 x 7A (24A total max)
with telemetry and current sensor
BEC 5V 2A
OSD AT7456E
Blackbox 8M
UARTs 3 (UART1/UART3/UART5)
Input 1S-2S
Size: 28mm x 28mm (30mm x 30mm outer dimensions)
Mounting 25mm*25mm
Weight 4g

 

Default/recommended port assignment:

  • UART1: Spare
  • UART2: Smart Audio
  • UART3: DJI O3 Air Unit
  • UART5: CRSF Rx (included on the board)

Includes

  • TBS Lucid AIO
  • TBS Crossfire "Micro RX" antenna
  • 4pcs rubber grommets
  • 4pcs motor sockets separate (for plug & play)

Downloads

 

Warranty Policy

For any warranty-related concerns with this product, please be aware that the manufacturer requires end users to contact them directly for troubleshooting or assistance with potentially defective items. As a retailer, we adhere to the policies set by our manufacturers.

If you believe your product is defective, please reach out to the manufacturer directly using the link below: Team BlackSheep Support System

For further assistance, use the Team BlackSheep Ticket System to connect with their customer support team.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.