FPVCycle

CineSplore/ToothFairy V4 Duct - set of 4

$29.99 USD Sold out
Notes

STL file to print your own here

We've come a pretty long way with duct designs.  Each iteration is incremental but definitely an improvement over the previous version.  This latest version is a design that comes from a member of the community.  After much discussion and testing, this latest duct provides more thrust, lower noise levels and better durability than any previous design.  You can mix and match this duct with any of the previous designs on the same craft and it will fly well.

The member of the community which primarily worked on this design has chosen not to make themselves known but the print file is available for anyone to print.  We just offer the ducts to make it easier for those without printers.  These prints are also from a PTEG material that is fully heat stable and a bit more durable than other options for such a design.  The prints are imperfect at the outlet of the duct because it is not as easy to print this design.

Note: The ducts do NOT fit the frame perfectly on purpose. When screwed into place the ducts are held under tension and are somewhat oval. When fresh props are inserted, they will rub against that walls of that duct. Arm the quad and get the props spinning, then hover for a few seconds to allow them to grind into place.  It will be loud during this process and then it will quiet down considerably. This sort of fit actually improves efficiency a but but more importantly, reduces overall vibrations in the system because it's all held under tension.  Again, this imperfection is a biproduct of printing but also helpful.  There is no issue if the ducts do not fit 100% perfectly. 

Specifications:

  • Improved ‘duct-foil’ for more thrust, better efficiency and no loss of control
  • Printed from PTEG which is fully heat stable
  • Durability is much better than PLA
  • Brass inserts not required and no longer included
  • ~13g per duct without brass inserts

STRONGLY Recommend:

- FPVCycle 23mm 3450kv motors
- 4S 1100-1300mah
- Gemfan 75mm triblade cinewhoop prop
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.