HDZero Eco Bundle

Name: HDZero Eco Bundle
Brand: Divimath, Inc.
SKU: HDZ3161
Price: 69.99 USD
Availability: InStock

SKU: HDZ3161

AVAILABILITY: In stock (12 items)

$69.99

Notes

Guaranteed safe checkout:

PRODUCT INFORMATION

HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.

This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.

The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.

HDZero Eco VTX Specifications:

- Composite HD Video Interface

- 1S-3S Input

- 25mW/200mW RF Output

- 25 x 25 M2 Soft Mounting

- Antenna Retention

- 4.5grams/4mm Thickness

HDZero Eco Camera Specifications:

- 14mm wide x 16 tall x 13mm thick

- 1.6g weight with cable

- 1/3” CMOS sensor

- FOV: 4:3 D:150° H:120° V:98°

- Suggested Setting

. Sharpness: 15

. Saturation: 8

. R Surp: 8

. Brightness: 45

Important Notes:

It is recommended to use VBAT for power supply.
When using BEC for power supply, ensure that the BEC's output capability is at least 5V@2A.

Flight Controller Warranty Policy

At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and the precision required for installation, our warranty policy for flight controllers is as follows:

1. No Warranty Post-Soldering:

Once any soldering has been performed on the flight controller, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.

2. Pre-Soldering Inspection:

Before you begin soldering, we recommend carefully inspecting the flight controller for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.

3. User Responsibility:

Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.

4. Final Sale:

All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.