Happymodel

HDZero Mobula6 ECO 2024

$150.00 USD
16 in stock, ready to ship
Notes

Mobular 6 ECO 2024 is the first BNF that uses HDZero ECO Bundle.

 

HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.

 

This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.

 

The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.

 

 

Features:

 

- AIO Flight controller with Serial ELRS Receiver

- Compatible with HDZERO system

- Equipment with the lightest brushless motors-SE0702 only 1.49gram

- HDZERO NEW ECO VTX and Camera ready

- Smooth and powerful

- Compatible for 1S Lipo/LIHV

- Onboard Blackbox ready

 

Specifications

Brand Name:    HDZero and Happymodel Co-branded
Model:    HDZero Mobula6 ECO 2024
Frame wheelbase:    65mm
Weight:    23.16g without battery
Size:    81mm * 81mm * 45mm
Receiver option:    UART ELRS v3.0
Battery Plug

GNB A30

 

Includes

- Mobula6 2024 1S 65mm whoop Drone Frame +Canopy * 1

- SuperX HD ELRS AIO flight controller * 1

- HDZero ECO VTX * 1

- HDZero ECO Camera * 1

- SE0702 KV28000 brushless motor * 4

- Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw) * 1

- Spare Canopy * 1

- Screw Driver * 1

- Propeller disassemble tool * 1

Warranty Policy:

If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn

Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.