NewBeeDrone

Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20x20 Designed for Extreme Racers

$59.99 USD
43 in stock, ready to ship
Notes

Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20x20 Design for Extreme Racer

The Hummingbird 200 RaceSpec 4in1 ESC is a compact, race-tuned 20x20 ESC engineered for the brutal demands of 5” FPV racing. Developed in collaboration with pro pilot Kyle Buell (Twidgit), it directly addresses real pain points racers face—overheating MOSFETs, pad failures after crashes, and oversized ESCs that don’t fit low-profile frames.

With 80A continuous current per channel and 100A burst, this ESC delivers the raw, reliable performance needed to win heats. It supports 3–6S LiPo input, making it perfect for today’s high-throttle 5” race setups.

The board is built on a 6-layer PCB with 3oz copper, blind vias, and a gold-plated finish, ensuring excellent thermal handling and structural durability. Two onboard 400W TVS diodes provide effective surge protection without requiring external components, keeping your build clean and protected.

A standout feature is the 3D motor pad structure—each motor pad wraps around the top, bottom, and side of the board. When properly soldered, this creates a grip-like bond that’s far more resistant to pad delamination, even after hard crashes or broken arms.

Powered by an AT32F421 MCU with integrated gate driver, the ESC runs smooth, responsive AM32 firmware, giving racers reliable performance and open-source configurability in a compact 20x20 footprint.

Whether you’re chasing podiums or rebuilding mid-event, the Hummingbird 200 RaceSpec ESC is built to handle it all—with the performance you need and the reliability you can trust.

 

Spec:

  • Input Voltage: 3–6S LiPo 
  • Continuous Current: 80A per channel 
  • Burst Current: 100A (up to 3 seconds) 
  • Firmware: AM32 
  • MCU: AT32F421 with built-in gate driver 
  • TVS Protection: 2x onboard TVS diodes (400W each) 
  • Motor Pads: 3D structure – top / bottom / side solderable  
  • PCB: 6-layer, 3oz copper, blind vias, gold-plated finish 
  • Signal Connector: 8-pin JST-SH 1.0 
  • Power Pads: Reinforced BAT+ / BAT– for high-current builds 
  • Mounting Pattern: 20x20mm (M3 holes) 
  • Dimensions: 35 x 45 mm (including solder pads) 
  • Weight: ~13.9g (without wires or capacitors) 
  • Use Case: 5” FPV racing, optimized for extreme reliability

Wire Diagram: 



Include:
1x Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20x20 Design for Extreme Racer
5x Grommet
1x 14awg Power cable 
1x XT60 Plug
1x 8Pin 100mm Silicone Cable for FC Connection
1x 1000uf Capacitor 
2x Tiny heat shrink for capacitor 

 
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.