NewBeeDrone

Hummingbird 255 AIO Flight Controller AT32F435 AM32 50A 3-6S

$79.99 USD
57 in stock, ready to ship
Notes

Hummingbird 255 AIO Flight Controller AT32F435 AM32 50A 3-6S

The HummingBird 255 AIO Flight Controller AT32F435 ICM42688 AM32 50A 3-6S is a powerful all-in-one solution tailored for modern FPV drone builds. Featuring a high-performance AT32F435 MCU with a blazing 288MHz core speed, it outperforms traditional F405 by up to 71% and F722 by 33%, delivering unmatched responsiveness and processing power. The Betaflight-recommended ICM-42688 gyro and dual independent BEC system (10V 2A + 5V 2A) deliver clean, stable power to your VTX, receiver, and GPS modules.

With a 6-pin plug-and-play HD VTX interface supporting DJI O4, Walksnail, and HDZero, plus reinforced 16-pin connectors to avoid soldering hassles, integration is effortless and reliable. Designed to handle 50A continuous and 60A burst current with a wide 3–6S input voltage range, it delivers robust performance under demanding conditions.

Optimized for 2.5" to 4" FPV drones, the standard 25.5x25.5mm mounting base and front-access layout make installation seamless. Whether you're building a high-speed ripper or a cinematic micro drone, the HummingBird 255 AIO is your ideal high-performance flight controller.

Perfect for pilots seeking ultra-smooth flight, advanced power handling, and solder-free convenience.



















👉 Recommended Frame Kit Combo
NewBeeDrone StingerBee HD O4 Pro 3” Frame Kit
👉Firmware: HUMMINGBIRD_AIO255


Specifications

  • MCU: AT32F435CGU7
  • Gyro: ICM-42688
  • Blackbox: 128MB
  • Connectors:
    • 6-Pin DJI FPV Air Unit Connector
    • USB-C Connector
  • UART Interfaces:
    • UART7 - SBUS on DJI Connector (RX only)
    • UART4 - DJI Connector
    • UART5 - Free
    • UART6 - Free
  • ESC: 4x AT32F421 AM32 ESC MCU
  • Continuous Current: 50A and 60A Burst ESC
  • Battery Input: 3-6S
  • Power Output: 10V 2A 20W (designed for HD VTX System)
  • Dimensions: 35x32mm with 25.5x25.5 Mounting Holes
  • Weight: 10.2g (without grommets)
  • Features:
    • Betaflight OSD support Analog build
    • I2C_SCL / I2C_SDA Ready
    • Buzzer Ready
    • LED Ready
    • 5V 2A Power supply for external LED or GPS module

Includes

  • 1x Hummingbird 255 AIO Flight Controller + ESC
  • 2x DJI O4 Cable 55mm (Silicon wire)
  • 2x 16Pin Cable 120mm (Teflon wire)
  • 10x Nylon Lock Nut
  • 5x Steel Screw M2x14
  • 4x Grommets Short
  • 1x 470uf 35v Electrolytic Capacitor
  • 1x XT30 Cable
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

 

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

 

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.