BETAFPV

Matrix 1S Brushless Flight Controller 4in1

$46.99 USD
100 in stock, ready to ship
Notes

Pickup available at SaltCtyRacingFPV LLC

Usually ready in 24 hours

Matrix 1S Brushless Flight Controller 4in1

The Matrix 1S Brushless Flight Controller redefines 1S whoop performance with two purpose-driven architectures: the 3IN1 for DJI O4 digital dominance (integrating FC, ESC, and ELRS 2.4G RX while omitting analog OSD), and the 4IN1 for analog mastery (adding built-in OSD + solder pads for external VTXs). Both feature the iconic cross-design architecture, newly developed BEC, 18A peak ESCs, and the STM32G473 MCU for 55% faster processing—delivering effortless setup, pro-tier control, and uncompromised flight dynamics that rewrite 1S standards.

Attention

  • Crafted for newcomers and recreational pilots, the Matrix FC features a robust 1mm board for enhanced durability, a solder-free design for easy installation, and a beginner-friendly experience. For advanced pilots, the ultra-thin and lightweight Air FC is the definitive choice, engineered with race-winning agility to push the boundaries of FPV flight performance.
  • Flight controllers are covered for manufacturer defects. Issues arising from user errors, physical crash damage, damage during installation or dismantling, modifications, power surges, electrical fires, or water exposure are not covered.

    Bullet Points

    • Dual DNA: 3IN1 (FC, ESC, and ELRS 2.4G RX) for DJI O4 digital dominance (omits analog OSD), 4IN1 for analog mastery with OSD.
    • STM32G473 MCU: 55% faster processing than F411 for responsive tuning.
    • Stable Video Transmission: Features a newly developed BEC to ensure consistent power delivery for seamless HD performance.
    • Enhanced Overcurrent Capacity: Supports 12A continuous current and 18A peak ESC, providing robust performance for demanding flights.
    • Reliable Precision: Includes an independent 3.3V LDO design to deliver stable, interference-free power directly to the IMU for accurate control.
    • Whoop-ready Installation: The 3IN1 is equipped with motor plugs and a SH1.0-6Pin HD digital port for a hassle-free installation and maintenance experience, while the 4IN1 has external VTX soldering pads for protocol flexibility.

    Specifications

    FC

    • MCU: STM32G473CEU6 (168MHz)
    • Gyro: ICM42688P
    • Blackbox Memory: 16MB
    • Sensor: Voltage & current
    • BEC: 5V/3A
    • UART (4IN1 Version): UART 1 (For VTX), UART 2 (Free), UART 3 (For RX), UART 4 (NONE)
    • ESC: 12A continuous
    • RX: Serial ELRS 2.4GHz (V3.4.3)
    •  Betaflight_4.5.2_BETAFPVG473_V2 (4IN1 version)
    • USB Port: SH1.0-4Pin
    • OSD: AT7456E (4IN1 version only)
    • Motor Plug: JST1.25-3Pin
    • Battery Connector: BT2.0
    • Mounting Size: 25.5mm x 25.5mm
    • Weight (4IN1 Version): 3.6±0.1g (battery connector excluded), 4.6±0.1g (battery connector included)

    ESC

    • Power Input: 1S only 
    • Current: 12A continuous, 18A peak
    • ESC Firmware: A_X_5_96_v0.19.2.hex for BB51 Bluejay firmware 
    • Digital Signal Protocol: DSHOT300, DSHOT600

    Package

    • 1 * Matrix 1S Brushless Flight Controller (4IN1)
    • 1 * Type-C to SH1.0 Adapter
    • 1 * SH1.0-4Pin Adapter Cable
    • 4 * M1.2*4 Self-tapping Screws
    • 4 * M1.4*5 Self-tapping Screws
    • 4 * Shock Absorbing Balls

     

     

    Flight Controller Warranty Policy

    At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and the precision required for installation, our warranty policy for flight controllers is as follows:

    1. No Warranty Post-Soldering: 
       Once any soldering has been performed on the flight controller, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
       
    2. Pre-Soldering Inspection: 
       Before you begin soldering, we recommend carefully inspecting the flight controller for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.

    3. User Responsibility: 
       Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.

    4. Final Sale: 
       All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
    Product information

    All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

     

    Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

     

    Flight Controller / VTX Warranty Policy
     
    At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
     
    1. No Warranty Post-Soldering: 
       Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
       
    2. Pre-Soldering Inspection: 
       Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
     
    3. User Responsibility: 
       Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
     
    4. Final Sale: 
       All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.

    **************************************************************************

    Lithium Ion Battery No Acceptance Policy

    For our lithium ion battery products, all sales are final. This means:

    • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
    • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
    • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

    Thank you for your understanding.

    Drop Us A Line

    We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.