Emax USA

Nanohawk 1S Ultralight Brushless FPV Drone

$101.99 USD
Receiver
144 in stock, ready to ship
Notes

 

* FrSky D16 mode binding results may vary! Newer ACCESS radios may not work with D16 mode. * 

 

In an effort to push the boundaries of miniaturizing the FPV experience, EMAX took to the drawing board to design the smallest quadcopter possible in their history. Introducing the NanoHawk, a nano sized FPV drone designed to offer an immersive flight experience in a new scale.


Weighing in at just 20 grams, the NanoHawk offers unmatched control and flight recovery, giving the pilot full control of the aircraft for any maneuver. Designed from the ground up is a modern frame design optimized for a unique mix of polycarbonate in order to offer maximum durability.


Debuting with the NanoHawk is the new Avia Series of propellers, redefining aerial performance with new design goals. With the Avia NanoHawk propeller, maximum thrust is achieved while maintaining an optimized throttle curve throughout the motor's performance, giving pilots better control than previously achieved with unique flight characteristics unparalleled with propellers in its class.


The NanoHawk offers an all new nano scaled experience to FPV drones, pushing the boundaries further of what is possible.

Features:

  • Uses guards specifically instead of ducts to take advantage of better flight characteristics and less drag created by ducts while using the carbon fiber main frame to retain rigidity and strength.
  • At a weight of 20 grams dry without battery, this is the lightest weight quadcopter EMAX has ever produced.
  • Standard on the NanoHawk platform is the Runcam Nano 3 which brings a premium FPV feed at an extremely low weight.
  • Featuring all new 0802 19000kv motors with new Avia NanoHawk 31mm propellers, we are able to get a powerful, yet smooth drone while still retaining flight time.
  • Utilizing the new lightweight, high-current power connector, the GNB27, with a new 300mAh wide 1S battery cell for maximum current throughput.
  • Newly designed All-In-One flight controller with 25mW video transmitter.

 

Includes:

1x NanoHawk Ultralight Indoor FPV Drone

1x 300mAh 1S H 3.8V GNB27 LiPo Battery

1x 1S USB Battery Charger

2x PH2.0 to GNB27 Charging Adapters

1x Spare Avia NanoHawk Propeller Set

1x Spare Hardware Kit 
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.