NewBeeDrone

NewBeeDrone Nitro Nectar Gold 3000mAh Tabless 18650 6S1P lithium-ion Battery

$89.99 USD
556 in stock, ready to ship
Notes

NewBeeDrone Nitro Nectar Gold 3000mAh 6S Tabless 18650 Battery 

We ship from our U.S. warehouse—due to battery shipping restrictions, please select FedEx for international orders (Canadian customers may use UPS Ground).

The revolution in long-range FPV continues.

Following the massive success of our Nitro Nectar Gold 1S single cells, you asked, and we listened. The ultimate long-range power source is now available in a pre-assembled 6S configuration, built specifically to take your 5-inch and 7-inch long-range builds to the next level.
This pack is built using the advanced JP30 tabless 18650 cells, offering unmatched current capability that blurs the line between the raw punch of LiPo and the extreme endurance of Li-ion.

The Tabless Advantage, Powered Up for 6S

Standard Li-ion cells are often limited by internal resistance that causes voltage sag and overheating under high loads. By using the JP30 tabless cell, this pack provides significantly more current compared to other 18650s on the market.For your 6S build, this translates to more reliable power for recovery maneuvers, less heat buildup during long cruises, and a longer overall battery lifespan.

Key Features

  • Massive Burst Capability: Deliver up to 160A for 10 seconds to power through tough situations without standard Li-ion current bottlenecking.Note: Actual performance and discharge rates may vary based on operating temperature.

  • True 6S High-Rate: Pre-assembled for standard long-range FPV configurations.

  • Premium Construction: Durable wrap designed to withstand the vibration and demands of dynamic flight.

  • XT60 Equipped: Fitted with a robust XT60 connector for secure power delivery.


Product Specifications:

  • Configuration: 6S1P (6 Cells in Series)

  • Total Capacity: 3000mAh

  • Cell Type: High-Rate Tabless JP30 18650

  • Total Battery Energy: 66.6Wh

  • Continuous Current: 60A

  • Burst Current: 160A 

  • Voltage Range: 15.6V to 25.5V (2.6V – 4.25V per cell)

  • Connector: XT60 Power Lead Length:105mm including the XT60 HEAD

  • Balance Connector: JST-XH Length: 51mm including the balance connector

  • Dimensions: Built for standard 18650 mounting (approx. 71.87mm x 37.62mm x 55.38mm)

  • Weight: 315g

 

In the Box:

  • 1x NewBeeDrone Nitro Nectar Gold 3000mAh 6S1P Tabless 18650 Li-ion Battery
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.