weBLEEDfpv

RACEGOW6 × weBLEEDfpv Gate Kit | NON-LED & Complete LED

$69.99 USD
CHOOSE GATE KIT
11 in stock, ready to ship
Notes

ONE KIT. EVERY RACEGOW6 TRACK.

Built specifically around the standardized RACEGOW6 track system, the RACEGOW6 × weBLEEDfpv Gate Kit gives you the sections and fittings needed to build ALL RACEGOW6 track layouts.

No track-specific gate kits. No guessing how many sections or fittings you need. Build the track, race it, break it down, and configure the next one using the same standardized package.

NON-LED GATE KIT ... $69.99

Everything needed to build the physical RACEGOW6 gate configurations without illumination.

Includes

  • 20 × WB Opal Gate Sections
  • 4 × 90° Elbows
  • 6 × 3-Way Tees
  • 6 × 4-Way Fittings
  • 2 × 5-Way Fittings

One standardized package designed to cover every RACEGOW6 track layout.

Build it. Race it. Break it down. Build the next one.

COMPLETE LED GATE KIT ... $189.99

Want the full setup?

The Complete LED Gate Kit includes the entire standardized RACEGOW6 gate package PLUS the power, control, splitters, and cabling needed to illuminate your course.

Includes

  • 20 × WB LED Opal Gate Sections
  • 4 × 90° Elbows
  • 6 × 3-Way Tees
  • 6 × 4-Way Fittings
  • 2 × 5-Way Fittings
  • 8 × LED JST 3-Pin One-to-Two Connectors
  • 1 × weBLEEDfpv SP611E Bluetooth LED Controller
  • 1 × 12V 6A AC/DC Power Supply
  • 4 × 300cm / 10' Daisy-Chain Cables
    (2 two-packs)

This is the full package.

No adding a controller later.
No hunting down the correct power supply.
No figuring out which splitters or cables you need.

It's all in the box.

Build the course. Plug it in. Light it up. Send it.

THE RACEGOW6 STANDARD

The standardized RACEGOW6 structural package consists of:

20 Sections
4 Elbows
6 Tees
6 Four-Ways
2 Five-Ways

That combination gives racers the components needed to reconfigure the gate system across all RACEGOW6 tracks.

ONE KIT → MULTIPLE TRACKS

Instead of buying a new gate setup for every course, you simply rearrange the components you already have.

BUILD → RACE → BREAK DOWN → RECONFIGURE → REPEAT

BUILT FOR FPV

Designed around the modular weBLEEDfpv gate system, the RACEGOW6 Gate Kit is ideal for:

  • RACEGOW6 participants
  • Home FPV tracks
  • Whoop racing
  • FPV clubs and chapters
  • Race directors
  • Indoor racing facilities
  • Practice courses
  • Organized FPV events

Whether you want a simple modular course or the full illuminated RACEGOW experience, the foundation stays the same.

CHOOSE YOUR PACKAGE

Package What's Included
NON-LED 20 Opal Sections + Complete Fitting Set
COMPLETE LED 20 LED Sections + Complete Fitting Set + Controller + Power Supply + Splitters + Cables
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.