Emax USA

Tinyhawk Indoor FPV Racing Drone BNF

$89.99 USD Sold out
Notes

 

 

 

 

  • Key Features:
    1. 75mm Indoor racing drone
    2. 8mm diameter brushless motors with durable ball bearings for increased flight time/performance and low maintenance
    3. Durable polypropylene plastic frame with propeller guards
    4. Motor beeper function to help find your Tinyhawk after an unintentional landing
    5. Speeds up to 56kph
    6. Up to 4 minutes of flight time on a single battery
    7. Fast F4 processor for smooth and stable flight characteristics
    8. MPU6000 gyro for vibration free operation
    9. Unique inverted motor design to keep the profile and center of gravity as low as possible
    10. 25mw video transmitter and 600 TV-line camera included for fun First Person View flight via FPV style goggles
    11. Smart Audio function allows changing the video channel via your transmitter
    12. On Screen Display settings controls allow customizable flight feel
    13. Pre-tuned from the factory by expert pilots with new pilots in mind
    14. Three different rate profile settings for various types of flying feel
    15. Plug-in type motors for easy maintenance
    16. 1s High Voltage (HV) 450mah Lithium-Polymer battery included
    17. Frsky compatible receiver built-in to the flight controller
    18. Custom carbon fiber themed carrying case

Included in Package:
  • Light weight soft carry case, with carbon fiber look
  • Tiny Hawk indoor flying drone
  • USB High Voltage capable 4 port USB Charger
  • 1s High Voltage (HV) 450mah lipo battery.
TinyHawk Properties:
Size: 75mm motor to motor L 110mm x W 95mm x H 39mm
Dry Weight: 29g
All Up Weight: 42g with 450mah 1s Li-Po Battery
Frame Material: Polypropylene
Propeller Properties:
Diameter: 40mm
Blades: 3
Pitch: 23mm
Weight: 0.5 g
Motor Properties:
Stator: 8mm diameter
Weight: 2.5g
Bearing Size: Φ1.5*Φ4*2mm
Shaft Diameter: Φ1.5mm
Propeller Mount: Press-Fit Over Bell
All-in-One Board:
Flight Controller: F4
ESCs: 4in1 3A
Receiver: Compatible with Frsky D8**
Battery Connector: JST-PH2
Camera and Video Transmitter:
VTX Power: 25mw
Channels: 37CH (unlocked)
Channel Changing: OSD/Smart Audio
Camera: 600TVL CMOS
Battery:
Voltage: 1s 4.35v HV
Capacity: 450 mAh
Discharge Rating: 80c/160c
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky's external XJT module for ACCESS transmitters for D8 mode capability.

RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.