Emax USA

Tinyhawk Lite Adventure - RTF - Ready To Fly Kit

$224.99 USD
67 in stock, ready to ship
Notes

 

Specification Details
Aircraft model Tinyhawk Lite Adventure
Wheelbase 115mm
Maximum external dimensions L×W×H = 148×144×45mm
Weight Approximately 59g (excluding battery box)
Motor 1020 Coreless Cup DC3.7V
Propeller 65mm three-blade propeller
Main control board STM32F411 (100MHz), 1S input
Receiver Onboard ELRS 2.4GHz (SPI)
Camera E02
VTX 32-bit 40CH open-source, 0/25/100/400mW
Battery 1S HV 850mAh

EMAX Tinyhawk Lite Adventure — Ready-To-Fly (RTF) Kit

The Tinyhawk Lite Adventure RTF is EMAX's most capable beginner FPV package — a 115mm indoor/outdoor micro drone with a 32-bit open-source VTX pushing up to 400mW, an 850mAh 1S HV battery for extended flight time, and ELRS 2.4GHz for a modern, low-latency radio link. The Adventure steps up from the standard Tinyhawk Lite with a larger frame, more powerful VTX, and bigger battery — designed for pilots who want to fly indoors and take their first steps outdoors. Everything is included and matched: drone, controller, goggles, battery, and charger.

  • 115mm wheelbase — larger than the standard Tinyhawk Lite for more stability and outdoor capability
  • 32-bit 40CH VTX up to 400mW — significantly more powerful than standard Tinyhawk VTX for outdoor range
  • 1S HV 850mAh battery — larger capacity for extended flight sessions vs standard Tinyhawk batteries
  • ELRS 2.4GHz onboard receiver — modern, low-latency ExpressLRS protocol
  • 1020 coreless motors + 65mm tri-blade props — smooth, efficient power for indoor and light outdoor flying
  • STM32F411 flight controller — capable FC for stable, responsive flight characteristics
  • Complete RTF package — drone, controller, goggles, battery, and charger all included

The Tinyhawk Lite Adventure RTF is for pilots who want to start indoors and grow into outdoor flying — a more capable, longer-range platform than the standard Tinyhawk Lite, in a complete matched kit that requires nothing extra to get in the air.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.