Emax USA

Wyvern Link OpenIPC - 200mW Video Transmitter VTX

$68.90 USD
7 in stock
Notes


 

Default Settings/Specs:

EMAX Wyvern Link OpenIPC — 200mW Digital FPV Video Transmitter

The EMAX Wyvern Link OpenIPC VTX is a 200mW open-source digital FPV video transmitter built for pilots who want HD-quality video without being locked into a proprietary ecosystem. Powered by OpenIPC firmware, the Wyvern Link gives you full control over your video link — tunable, hackable, and community-supported.

Whether you're building a high-performance freestyle quad, a long-range cruiser, or a racing rig, the Wyvern Link delivers clean, low-latency digital video with the flexibility that open-source pilots demand.

Key Features

  • 200mW Output Power — Strong, reliable digital video signal for freestyle, racing, and proximity flying
  • OpenIPC Firmware — Open-source, community-driven platform with active development and full configurability
  • Digital HD Video Transmission — Sharp, low-latency FPV feed compatible with OpenIPC-supported ground stations and goggles
  • Lightweight & Compact — Designed to fit tight builds without adding unnecessary weight
  • Broad Compatibility — Works with OpenIPC-compatible cameras and ground station hardware
  • No Subscription, No Lock-In — Open ecosystem means you own your video link, fully

Who Is This For?

The Wyvern Link OpenIPC VTX is ideal for intermediate to advanced FPV builders who are comfortable with open-source firmware and want the freedom to customize their video link. It's a natural choice for pilots moving away from closed digital systems like DJI O3 or Walksnail, and for long-range and fixed-wing builders who prioritize tunability and community support over plug-and-play simplicity.

Why OpenIPC?

OpenIPC is one of the fastest-growing open-source FPV video platforms in the community. Unlike proprietary systems, OpenIPC is continuously improved by a global developer community — meaning better features, more compatibility, and no artificial ecosystem restrictions. The Wyvern Link brings this platform to an Emax-quality hardware package, field-tested and ready to fly.

Compatible With

  • OpenIPC-supported FPV cameras and sensors
  • OpenIPC ground stations and video receivers
  • Standard FPV flight controller stacks (UART connection)

For full setup instructions and firmware documentation, refer to the official OpenIPC community resources.
Product information

All parts are shipped fast from SYRACUSE, NEW YORK & some DROP SHIP ORDERS from San Diego, California. If there's an issue with something, please let us know and we will do our best make it right! SaltCtyRacingFPV, LLC dba "weBLEEDfpv.com" offers a (30) day return policy on all new unopened equipment, starting from the date the product(s) was delivered to the customer. Anything beyond (30) days of delivery will not be eligible for return. If the product(s) received have been opened, used or damaged, no return options will be offered. If the item is in brand new condition but requires to be repackaged, a (15%) restocking fee will be applied. The shipping cost for any unwanted product will not be refunded by SaltCtyRacingFPV "weBLEEDfpv.com" (It is recommended to choose a return shipping method with tracking).

**************************************************************************

Please email at SaltCtyRacingFPV@gmail.com to contact us and initiate a return. Please contact us first before sending anything back. 

**************************************************************************

Flight Controller / VTX Warranty Policy
 
At weBLEEDfpv, we are committed to providing high-quality products. However, due to the technical nature of flight controllers and VTX's the precision required for installation, our warranty policy for flight controllers is as follows:
 
1. No Warranty Post-Soldering: 
   Once any soldering has been performed on the flight controller / VTX's, we are no longer responsible for replacements, repairs, or refunds. The process of soldering can introduce various factors that may lead to damage, and we are unable to control or verify the conditions in which the soldering was conducted.
   
2. Pre-Soldering Inspection: 
   Before you begin soldering, we recommend carefully inspecting the flight controller  / VTX's for any potential issues. If any defects or issues are found prior to soldering, please contact us immediately for a replacement.
 
3. User Responsibility: 
   Soldering requires skill and experience, and improper techniques may result in damage to the flight controller, including but not limited to overheating or lifting solder pads. Please ensure you are confident in your soldering abilities before proceeding, as we cannot be held liable for any damages caused during installation.
 
4. Final Sale: 
   All flight controller sales are final once the product has been modified or soldered. We are unable to offer returns or exchanges on used or modified products.
**************************************************************************

⚠️ FPV DIGITAL SYSTEM NOTICE

HDZero, Walksnail, VTX systems, and ultra-micro FPV electronics generate heat quickly while powered and require proper handling during setup and troubleshooting.

Bench setup without airflow/cooling can result in excessive heat buildup.

Once powered, configured, firmware updated, soldered, flown, or modified, products are considered used.

Manufacturer warranty may apply for BNF drones and electronic systems.

**************************************************************************

Lithium Ion Battery No Acceptance Policy

For our lithium ion battery products, all sales are final. This means:

  • No Returns or Exchanges: Once your purchase is completed, we do not accept returns, exchanges, or cancellations.
  • Customer Responsibility: Please review all product specifications and details carefully before making your purchase.
  • Safety and Compliance: Due to safety standards and regulatory guidelines, we cannot process any post-sale modifications.

**************************************************************************

Thank you for your understanding.

Drop Us A Line

We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.